F28M36P63C2

Product Folder Order Now Technical Documents Tools & Software Support & Community F28M36P63C2, F28M36P53C2, F28M36H53C2, F28M36H53B2 F28M36H33C2, F28M36H33B2 SPRS825E – OCTOBER 2012 – REVISED DECEMBER 2017 F28M36x Concerto™ Microcontrollers 1 Device Overview 1.1 Features 1 Master Subsystem — ARM® Cortex®-M3 – 125 MHz – Embedded Memory – Up to 1MB of Flash (ECC) – Up to 128KB of RAM (ECC or Parity) – Up to 64KB of Shared RAM – 2KB of IPC Message RAM – Five Universal Asynchronous Receiver/Transmitters (UARTs) – Four Synchronous Serial Interfaces (SSIs) and a Serial Peripheral Interface (SPI) – Two Inter-integrated Circuits (I2Cs) – Universal Serial Bus On-the-Go (USB-OTG) + PHY – 10/100 ENET 1588 MII – Two Controller Area Network, D_CAN, Modules (Pin-Bootable) – 32-Channel Micro Direct Memory Access (µDMA) – Dual Security Zones (128-Bit Password per Zone) – External Peripheral Interface (EPI) – Micro Cyclic Redundancy Check (µCRC) Module – Four General-Purpose Timers – Two Watchdog Timer Modules – Endianness: Little Endian Clocking – On-chip Crystal Oscillator and External Clock Input – Dynamic Phase-Locked Loop (PLL) Ratio Changes Supported 1.2-V Digital, 1.8-V Analog, 3.3-V I/O Design Interprocessor Communications (IPC) – 32 Handshaking Channels – Four Channels Generate IPC Interrupts – Can be Used to Coordinate Transfer of Data Through IPC Message RAMs Up to 142 Individually Programmable, Multiplexed General-Purpose Input/Output (GPIO) Pins – Glitch-free I/O...