EUP8202-4.2/8.4 Switch Mode Li-Ion/Polymer Battery Charger
DESCRIPTION
The EUP8202 is a constant current, constant volta...
EUP8202-4.2/8.4 Switch Mode Li-Ion/Polymer Battery Charger
DESCRIPTION
The EUP8202 is a constant current, constant
voltage Li-Ion battery charger controller that uses a current mode PWM step-down (buck) switching architecture. With a 500kHz switching frequency, the EUP8202 provides a small, simple and efficient solution to fast charge one (4.2V) or two (8.4V) cell lithium-ion batteries. The EUP8202 charges the battery in three phases: conditioning, constant current, and constant
voltage. An external sense resistor sets the charge current with ¡Ó 10% accuracy. An internal resistor divider and precision www.DataSheet4U.com reference set the final float
voltage to 4.2V per cell with ¡Ó 1% accuracy. An internal comparator detects the near end-of-charge condition while an internal timer sets the total charge time and terminates the charge cycle. The EUP8202 automatically re-starts the charge if the battery
voltage falls below an internal threshold, 4.05V per cell. The EUP8202 also automatically enters sleep mode when DC supplies are removed. The EUP8202 is available in the 8-lead SOP and 10-lead TDFN packages.
FEATURES
z Wide Input Supply
Voltage Range: 4.7V to 20V – 4.2 Version 8.9V to 20V – 8.4 Version 500kHz Switching Frequency End-of-Charge Current Detection Output 3 Hour Charge Termination Timer ¡Ó 1% Charge
Voltage Accuracy ¡Ó 10% Charge Current Accuracy Low 10µA Reverse Battery Drain Current Automatic Battery Recharge Automatic Trickle Charging of Low
Voltage Batteries Aut...