ESD5205

ESD5205 ESD Protection Diodes Low Capacitance ESD Protection Diode for High Speed Data Line The ESD5205 surge protection is designed to protect high speed data lines from ESD. Low capacitance and low ESD clamping voltage make this device an ideal solution for protecting voltage sensitive high speed data lines. Features Protection for the Following IEC Standards: IEC 61000−4−2 (Level 4) Low ESD Clamping Voltage This is a Pb−Free Device Typical Applications mSD Connector MAXIMUM RATINGS (TJ = 25°C unless otherwise noted) Rating Symbol Value Unit Peak Power Dissipation, 8 x 20 ms PPK 18 W Operating Junction Temperature Range TJ −55 to +125 °C Storage Temperature Range Tstg − 55 to +150 °C Lead Solder Temperature − Maximum (10 Seconds) TL 260 °C IEC 61000−4−2 Contact (ESD) IEC 61000−4−2 Air (ESD) ESD ESD ±15 kV ±15 kV Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. www.onsemi.com MARKING DIAGRAM SOT−963 CASE 527AD XM 1 X = Specific Device Code M = Month Code PIN CONFIGURATION AND SCHEMATIC 16 25 34 ORDERING INFORMATION Device ESD5205P6T6G Package SOT−963 (Pb−Free) Shipping 8000 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. See Application Not...