ES100

ABB Control 10, Rue Ampère 69680 Chassieu TRANSTRONIC Code : ES100 Issued Modif N° of : 20.10.92 4 04.10.93 Electronic measuring transformer for d.c., a.c., and pulsating currents with a high isolation level between primary and seconda ry circuits. PATENTED MODEL DESCRIPTION AND GENERAL CHARACTERISTICS Proted electronic circuit Self extinguishing plastic case Weight Operating temperature Storage temperature Direction of the current Protections : (g) (° C) (° C) : : : 50 -5 - 25 + 70  + 85 - A primary current in the direction of arrow gives a positive output current on the terminal M . - Against short and open circuit of the output Instructions for use and mounting according to our technocal catalgue http://www.Datasheet4U.com ELECTRICAL CHARACTERISTICS - Nominal current IPN - Supply voltage - Measuring range RM max. RM max - Overload - Turn ratio - Secondary current I SN at I PN - accuracy at I PN ( from - 5 to + 70 ° C) - Includind : Residual current IsO Linearity better than With thermal drift I SN - Delay time - di/dt - Bandwidth at 1 db - Current drain unload current I (inload IAO + IS) AO - Internal secondary resistance at + 70° C( - Dielectric strength P /S - Measuring resistor minimum value at +/- 12 V at maximum of the at +/- 15 V operating temperature at +/- 20 V (1) Use under one way current 24 V - RM minimum (A eff.) (V) (Adc) (Ω) (Ω) (Â) N P /N S (mA) (%) (mA) (/° C) (ms) (A/ms) (kHz) (mA) (mA) Ω ): (kV eff.50 Hz/1mn) (Ω) ( Ω) ( Ω) (Ω) : : : : : : : : :...