DATASHEET
EL9200, EL9201, EL9202
Programmable VCOM
The EL9200, EL9201, and EL9202 represent programmable VCOM amplifie...
DATASHEET
EL9200, EL9201, EL9202
Programmable VCOM
The EL9200, EL9201, and EL9202 represent programmable VCOM
amplifiers for use in TFT-LCD displays. Featuring 1, 2, and 4 channels of VCOM amplification, respectively, each device features just a single programmable current source for adding offset to one VCOM output. This current source is programmable using a single wire interface to one of 128 levels. The value is stored on an internal EEPROM memory.
The EL9200 is available in the 12 LD DFN package and the EL9201 and EL9202 are available in 24 LD QFN packages. All are specified for operation over the -40°C to +85°C temperature range.
Typical Block Diagram
VSD
AVDD
CE
VS+ INN +
EEPROM
RF RG
VOUT INP
GND
AVDD R1 R2
CTL
CONTROL
GND
UP/DOWN COUNTER
ANALOG POT
IOUT
SET RSET
FN7438 Rev 1.00 October 30, 2008
Features
128 Step Adjustable Sink Current EEPROM Memory
2-pin Adjustment and Disable Single, Dual or Quad
Amplifiers
- 44MHz Bandwidth - 80V/µs Slew Rate - 60mA Continuous Output - 180mA Peak Output Up to 18V Operation 2.6V to 3.6VLogic Control
Pb-free Available (RoHS compliant)
Applications
TFT-LCD VCOM Supplies For - LCD-TVs - LCD Monitors
Pinouts
EL9200 (12 LD DFN) TOP VIEW
EL9201 (24 LD QFN) TOP VIEW
EL9202 (24 LD QFN) TOP VIEW
24 NC 23 GND 22 NC 21 VINA+ 20 VINA24 VINA23 VINA+ 22 VS+ 21 VINB+ 20 VINB-
VINA- 1 GND 2 VINA+ 3 IOUT 4 AVDD 5 GND 6
THERMAL PAD
12 VS+ 11 VOUTA 10 SET 9 CE 8 CTL 7 VSD
NC 1 NC 2 VINB+ 3 IOUT 4 NC 5 AVDD 6...