EL9110

EL9110 Differential Receiver/Equalizer The EL9110 is a single channel differential receiver and equalizer. It contains a high speed differential receiver with 5 programmable poles. The outputs of these pole blocks are then summed into an output buffer. The equalization length is set with the voltage on a single pin. The EL9110 also contains a three-statable output, enabling multiple devices to be connected in parallel and used in a multiplexing application. The gain can be adjusted up or down by 6dB using the VGAIN control signal. In addition, a further 6dB of gain can be switched in to provide a matched drive into a cable. The EL9110 has a bandwidth of 150MHz and consumes just 33mA on ±5V supply. A single input voltage is used to set the compensation levels for the required length of cable. The EL9110 is available in the 16 Ld QSOP package and is specified for operation over the full -40°C to +85°C temperature range. Ordering Information PART NUMBER PART MARKING PACKAGE PKG. DWG. # EL9110IU 9110IU 16 Ld QSOP MDP0040 EL9110IU-T7* 9110IU 16 Ld QSOP MDP0040 EL9110IU-T13* 9110IU 16 Ld QSOP MDP0040 EL9110IUZ (Note) 9110IUZ 16 Ld QSOP MDP0040 (Pb-free) EL9110IUZ-T7* 9110IUZ (Note) 16 Ld QSOP MDP0040 (Pb-free) EL9110IUZ-T13* 9110IUZ (Note) 16 Ld QSOP MDP0040 (Pb-free) *Please refer to TB347 for details on reel specifications. NOTE: These Intersil Pb-free plastic packaged products employ special Pb-free material sets; molding compounds/die attach materials and 10...