EL5166, EL5167
1.4GHz Current Feedback Amplifiers with Enable
The EL5166 and EL5167 amplifiers are of the current feedba...
EL5166, EL5167
1.4GHz Current Feedback
Amplifiers with Enable
The EL5166 and EL5167
amplifiers are of the current feedback variety and exhibit a very high bandwidth of 1.4GHz at AV = +1 and 800MHz at AV = +2. This makes these
amplifiers ideal for today's high speed video and monitor applications, as well as a number of RF and IF frequency designs.
With a supply current of just 8.5mA and the ability to run from a single supply
voltage from 5V to 12V, these
amplifiers offer very high performance for little power consumption.
The EL5166 also incorporates an enable and disable function to reduce the supply current to 13µA typical per amplifier. Allowing the CE pin to float or applying a low logic level will enable the amplifier.
The EL5167 is offered in the 5 Ld SOT-23 package and the EL5166 is available in the 6 Ld SOT-23 as well as the industry-standard 8 Ld SOIC packages. Both operate over the industrial temperature range of -40°C to +85°C.
Related LIterature
For a full list of related documents, visit our website:
EL5166, EL5167 device pages
DATASHEET
FN7365 Rev.6.01 May 28, 2020
Features
Gain-of-1 bandwidth = 1.4GHz/gain-of-2 bandwidth = 800MHz
6000V/µs slew rate Single and dual supply operation from 5V to 12V Low noise = 1.7nV/√Hz 8.5mA supply current Fast enable/disable (EL5166 only) 600MHz family - (EL5164 and EL5165) 400MHz family - (EL5162 and EL5163) 200MHz family - (EL5160 and EL5161) Pb-free available (RoHS compliant)
Applications
Video ampli...