Microcontroller Programmer
www.DataSheet4U.com
DS87000 Microcontroller Programmer
www.dalsemi.com
Features
• • • • • Operates in Stand Alone or P...
Description
www.DataSheet4U.com
DS87000 Microcontroller Programmer
www.dalsemi.com
Features
Operates in Stand Alone or PC-Hosted Modes Easy to use pull-down menus in PC-Hosted mode Operation from front panel in stand alone mode Uses efficient "intelligent" programming techniques Non-volatile data and operating parameter storage Optional automatic device serialization (unique identifier written to every device programmed) Programs 40-pin DIP packages; DS87001 plug-in adapters available for other package types Includes 110 volt (DS87000-000 for U.S.) or 220 volt (DS87000-220) power supply
Description
The DS87000 is a programming solution that provides a convenient, inexpensive method of programming Dallas Semiconductor's family of EPROM-based Microcontrollers. The system comes complete with the programmer, menu based PC software, power supply, and RS-232 cable. The programmer may be operated in a stand-alone or PC hosted mode. Initially, a PC loads programming information into the DS87000. Once loaded, there is no further requirement for the PC and the programmer may then be operated completely from its front panel if desired. This allows the DS87000 to be easily moved to where it is needed. When a PC is available, the DS87000 may be operated from the menu-based software provided. Operations in front panel in stand-alone mode are initiated via the programmer's four push buttons. Three lights (LEDs) provide feedback on system status. The convenient plug-in transformer pro...
Similar Datasheet