DS1972

www.DataSheet4U.com DS1972 1024-Bit EEPROM iButton www.maxim-ic.com iButton DESCRIPTION The DS1972 is a 1024-bit, 1-Wire EEPROM organized as four memory pages of 256 bits each in a rugged iButton package. Data is written to an 8byte scratchpad, verified, and then copied to the EEPROM memory. As a special feature, the four memory pages can individually be write protected or put in EPROM-emulation mode, where bits can only be changed from a 1 to a 0 state. The DS1972 communicates over the single-conductor 1-Wire bus. The communication follows the standard Dallas Semiconductor 1-Wire protocol. Each device has its own unalterable and unique 64-bit ROM registration number that is factory lasered into the device. The registration number is used to address the device in a multidrop 1-Wire net environment. ® SPECIAL FEATURES § § § § § § 1024 Bits of EEPROM Memory Partitioned into Four Pages of 256 Bits Individual Memory Pages can be Permanently Write Protected or Put in EPROM-Emulation Mode ("Write to 0") Switchpoint Hysteresis and Filtering to Optimize Performance in the Presence of Noise IEC 1000-4-2 Level 4 ESD Protection (8kV Contact, 15kV Air, typical) Reads and Writes Over a Wide Voltage Range of 2.8V to 5.25V from -40°C to +85°C Communicates to Host with a Single Digital Signal at 15.4kbps or 125kbps Using 1-Wire Protocol Unique Factory-Lasered 64-Bit Registration Number Assures Error-Free Device Selection and Absolute Traceability Because No Two Parts are Alike Built-In ...