DatasheetsPDF.com

DM7832 Datasheet

Part Number DM7832
Manufacturers National Semiconductor
Logo National Semiconductor
Description Line Driver
Datasheet DM7832 DatasheetDM7832 Datasheet (PDF)

N M 00 00 Line 0 rivers/Receivers ,:c! N M DM7831/DM8831.DM7832/DM8832 TRI-STATETM line driver 1!2 :! general description c Through simple logic control, the DM7831/ DM8831, DM7832/DM8832 can be used as either a quad single-ended line driver or a dual differential line driver. They are specifically designed for party line (bus-organized) systems. The DM7832/ DM8832 does not have the Vee clamp diodes found on the DM7831/DM8831. The DM7831 & DM7832 are specified for operation over .

  DM7832   DM7832






Part Number DM7838
Manufacturers National Semiconductor
Logo National Semiconductor
Description quad TRI-STATE transceivers
Datasheet DM7832 DatasheetDM7838 Datasheet (PDF)

Line Drivers IReceivers DM7838/DM8838 quad unified"bus transceiver general description ~·features The DM7838/DM8838 are quad high speed drivers!' receivers designed for use in bus organized datatransmission systems interconnected by termi· nated 120n Impedance lines. The external termi· nation is intended to be a 180n resistor from the bus to the +5V logic supply together with a 390n resistor from the bus to ground. The bus can be terminated at one or both ends. Low bus pin cur· rent allows .

  DM7832   DM7832







Part Number DM7837
Manufacturers National Semiconductor
Logo National Semiconductor
Description hex unified bus receiver
Datasheet DM7832 DatasheetDM7837 Datasheet (PDF)

Line Drivers/Receivers DM7837/DM8837 hex unified bus receiver general description The DM7837/DM8837 are high speed receivers designed for use in bus organized data transmission systems Interconnected by terminated 120n Impedance lines. The external termination is intended to be 180[2 reSIStor from the bus to the +5V logic supply together with a 390[2 resistor from the bus to ground. The receiver design employs a built-in Input hysteresIs providing substantial nOise Immunity. Low input current .

  DM7832   DM7832







Part Number DM7836
Manufacturers National Semiconductor
Logo National Semiconductor
Description quad NOR unified bus receiver
Datasheet DM7832 DatasheetDM7836 Datasheet (PDF)

Line Drivers/Receivers DM7836/DM8836 quad NOR unified bus receiver general description The DM7836/DM8836 are quad 2-lnput receivers designed for use In bus organized data transmission systems interconnected by terminated 120Q impedance lines_ The external termination IS intended to be 180Q reSIStor from the bus to the +5V logic supply together with a 390Q resistor from the bus to ground_ The design employs a built-in input hysteresIs providing substantial noise Immunity. Low Input current allo.

  DM7832   DM7832







Part Number DM7835
Manufacturers National Semiconductor
Logo National Semiconductor
Description quad TRI-STATE transceivers
Datasheet DM7832 DatasheetDM7835 Datasheet (PDF)

New Products DM7833/DM 8833, DM7834/DM8834, DM7835/DM8835, DM7839/DM8839 quad TRI-STATE® transceivers general description This family of TRI·STATE® party line trans· ceivers offer extreme versatility in bus organized data transm ission systems. The data bus may be unterminated, or terminated DC or AC at one or both ends. Drivers in the third (high impedance) state load the data bus with a negligible leakage current. The receiver input current is low allowing at least 100 driver/receiver pairs t.

  DM7832   DM7832







Part Number DM7834
Manufacturers National Semiconductor
Logo National Semiconductor
Description quad TRI-STATE transceivers
Datasheet DM7832 DatasheetDM7834 Datasheet (PDF)

New Products DM7833/DM 8833, DM7834/DM8834, DM7835/DM8835, DM7839/DM8839 quad TRI-STATE® transceivers general description This family of TRI·STATE® party line trans· ceivers offer extreme versatility in bus organized data transm ission systems. The data bus may be unterminated, or terminated DC or AC at one or both ends. Drivers in the third (high impedance) state load the data bus with a negligible leakage current. The receiver input current is low allowing at least 100 driver/receiver pairs t.

  DM7832   DM7832







Line Driver

N M 00 00 Line 0 rivers/Receivers ,:c! N M DM7831/DM8831.DM7832/DM8832 TRI-STATETM line driver 1!2 :! general description c Through simple logic control, the DM7831/ DM8831, DM7832/DM8832 can be used as either a quad single-ended line driver or a dual differential line driver. They are specifically designed for party line (bus-organized) systems. The DM7832/ DM8832 does not have the Vee clamp diodes found on the DM7831/DM8831. The DM7831 & DM7832 are specified for operation over the -55°C to +125°C military temperature range. The DM8831 & DM8832 are specified for operation over the O°C to +70°C temperature range. features • Series 54174 compatible • 17 ns propagation delay • Very low output impedance-high dril, capability • 40 mA sink and source currents • Gating control to allow either single-ended or differential operation • High impedance output state which allows many outputs to be connected to a common bus line. mode of operation To operate as a q.


2017-09-18 : BP5035A5    TIL139    TIL138    SD4863    TRV-480    TRV-7625    TRV-10200    TRA-Y12DF-T2    TRV-320    1N5279B   


@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)