CS8161
CS8161
12V, 5V Low Dropout Dual Regulator with ENABLE
Description
The CS8161 is a 12V/5V dual output linear regu...
CS8161
CS8161
12V, 5V Low Dropout Dual Regulator with ENABLE
Description
The CS8161 is a 12V/5V dual output linear regulator. The 12V ± 5% output sources 400mA and the 5V ±2.0% output sources 200mA. The on board ENABLE function controls the regulatorÕs two outputs. When the ENABLE pin is low, the regulator is placed in SLEEP mode. Both outputs are disabled and the regulator draws only 200nA of quiescent current. The primary output, VOUT1 is protected against over
voltage conditions. Both outputs are protected against short circuit and thermal runaway conditions. The CS8161 is packaged in a 5 lead TOÐ220 with copper tab. The copper tab can be connected to a heat sink if necessary. It is also available in a 16 lead SO wide package.
Features
s Two regulated outputs 12V ±5.0%; 400mA 5V ±2.0%; 200mA s Very low SLEEP mode current drain 200nA s Fault Protection Reverse Battery (-15V) 74V Load Dump -100V Reverse Transient Short Circuit Thermal Shutdown
Absolute Maximum Ratings Input
Voltage Operating Range .....................................................................Ð15V to 26V Over
voltage Protection.........................................................................74V Internal Power Dissipation ..................................................Internally Limited Junction Temperature Range.......................................................Ð40¡C +150¡C Storage Temperature Range....................................................Ð65¡C to +150¡C Lead Temperature Sold...