CPU Module
CPU Module
March 1999 GFK-1536C
Product Information _________________________________
Revision: Firmware version: Compa...
Description
CPU Module
March 1999 GFK-1536C
Product Information _________________________________
Revision: Firmware version: Compatibility: CPU001-BB 1.10 VersaPro software version 1.0
Module Installation _________________________________
1
Modules must be mounted on a horizontal DIN rail. 1.
2
133.35mm (5.25in)
Allow sufficient finger clearance for opening CPU door. Allow adequate clearance for serial port cables. Allow adequate space for power wiring.
New Features ____________________________________
This version of CPU001 provides:
2. 3.
S S
Support for intelligent I/O modules. Scaling function blocks. Two new function blocks can be used to scale input data. One function block is for unipolar (unsigned) input data. The other function block is for bipolar (signed) input data.
66.80mm (2.63in)
The CPU with power supply attached fits into a 70mm deep enclosure. Rated thermal specifications for the CPU module is based on a clearance of 2” above and below the equipment and 1” to the left of the CPU module.
S
Drum Sequencer function block.
3
This new function block works like a mechanical drum sequencer. It allows a sequence of output combinations to be selected in turn. See the heading “The Drum Sequencer Function” for more www.DataSheet4U.com information.
Installing the CPU on the DIN Rail
The CPU and connecting carriers must be installed on the same section of 35mm x 7.5mm DIN rail. The rail must have a conductive (unpainted) finish for proper grounding. For best stability...
Similar Datasheet