Analog Peripherals - 24 or 16-Bit ADC
• No missing codes • 0.0015% nonlinearity • Programmable conversion rates up to 1 ...
Analog Peripherals - 24 or 16-Bit ADC
No missing codes 0.0015% nonlinearity Programmable conversion rates up to 1 ksps 8-Input multiplexer 1x to 128x PGA Built-in temperature sensor
- Two 8-Bit Current Output DACs - Comparator
Programmable hysteresis and response time Configurable as interrupt or reset source Low current (0.4 µA)
On-chip Debug - On-chip debug circuitry facilitates full speed, non-
intrusive in-system debug (No emulator required)
- Provides breakpoints, single stepping, inspect/modify memory and registers
- Superior performance to emulation systems using ICE-Chips, target pods, and sockets
- Low Cost, Complete Development Kit
Supply
Voltage 2.7 to 3.6 V - Typical operating current: 5.8 mA @ 25 MHz;
11 µA @ 32 kHz
- Typical stop mode current: 0.1 µA
Temperature Range: –40 to +85 °C
C8051F350/1/2/3
8 k ISP Flash MCU Family
High Speed 8051 µC Core - Pipelined Instruction architecture; executes 70% of
instructions in 1 or 2 system clocks - Up to 50 MIPS throughput - Expanded interrupt handler Memory - 768 Bytes (256 + 512) On-Chip RAM - 8 kB Flash; In-system programmable in 512-byte
Sectors Digital Peripherals - 17 Port I/O; All 5 V tolerant with high sink current - Enhanced UART, SMBus™, and SPI™ Serial Ports - Four general purpose 16-bit counter/timers - 16-bit programmable counter array (PCA) with three
capture/compare modules - Real time clock mode using PCA or timer and exter-
nal clock source Clock Sources - Internal Oscillator: 24.5 MH...