Crimp
PH CONNECTOR
Disconnectable Crimp style connectors
• Reliable contact • Easy and effective crimping
Emboss Tape
...
Crimp
PH CONNECTOR
Disconnectable Crimp style connectors
Reliable contact Easy and effective crimping
Emboss Tape
2.0mm
(.079") pitch
Features –––––––––––––––––––––––
The contact has long dimples near the center to ensure a good connection at all times, even under conditions of vibration and mechanical abuse, and when used with low
voltage and low current circuits. Although the contact is compact, it has a long wire strip holding length of 2.6 +/- 0.4mm (.102" +/-.016"). This long length simplifies automatic crimping and the crimping of shielded wires.
Fully shrouded header
The fully shrouded header has walls on all four sides to prevent improper connection to the mating housing and to prevent the instruction of flux and other contaminants.
High solderable square post
The square post is copper-undercoated and tin/lead-plated for superior solderability and for whisker prevention.
Printed circuit board retention mechanism
This is a thin, low-profile 2.0mm (.079") pitch connector 7.5mm (.295") in height after mounting and 4.5mm (.177") in width. It is designed to meet the demand for high-density connection of internal wires to printed circuit boards. It is compact, highly reliable and low in cost.
The solder side of the header has a retention mechanism that prevents it from floating during soldering. As a result, the header can be positioned accurately.
Compatible with the KR insulation displacement connector
The same shrouded header can be used for either ...