AUIPS6044G

December, 10th 2011 Automotive grade AUIPS6044G INTELLIGENT POWER HIGH SIDE SWITCH Features  Over temperature shutdown (with auto-restart)  Short circuit protection (current limit)  Reverse battery protection (turns On the MOSFET)  Full diagnostic capability (short circuit to battery)  Active clamp  Open load detection in On and Off state  Ground loss protection  Logic ground isolated from power ground  ESD protection Description The AUIPS6044G is quad output Intelligent Power Switch (IPS) for use in a high side configuration. It features short circuit, over-temperature, ESD protection, inductive load capability and diagnostic feedback. The output current is limited to the Ilim value. The current limitation is activated until the thermal protection acts. The over-temperature protection turns off the device if the junction temperature exceeds the Tshutdown value. It will automatically restart after the junction has cooled 7°C below the Tshutdown value. The reverse battery protection turns On the MOSFET. A diagnostic pin provides different voltage levels for each fault condition. The double level shifter circuitry will allow large offsets between the logic and load ground. Typical Connection Product Summary Rds(on) Vclamp I Limit Open load 130m max. 39V 7A 3V / 0.22A Package SOIC28 Wide body +5V +Bat Rdgp Rdgs Dg Vcc Control V Diag Input Signal Rin In Gnd Out Load Pull-up resistors required for open load off and short circuit to Vbat detection www.irf...