30Amps
ATH30
Total Power: Input Voltages: No. of Outputs:
143W 3.3V, 5V, 12V Single
Electrical Specs
Input
Input Rang...
30Amps
ATH30
Total Power: Input
Voltages: No. of Outputs:
143W 3.3V, 5V, 12V Single
Electrical Specs
Input
Input Range 3.0 - 3.6V 4.5 - 5.5V 10.8 - 13.2V Under
Voltage Lockout with hysterisis Efficiency up to 94%
www.DataSheet4U.com
Output
Overall Regulation Noise/Ripple Remote sense Transient Response 1% of Vo Typ 40mV Typ (2.5Vo and below) 1% Vo Typ (Vo > 2.5V) Up to 300mV max 100mV typical for 3.3Vo for 50% to 100% IO,MAX step change 70us recovery time (Co = 330uF) 155% IO,MAX typical (autorecovery)
Special Features
Point-of-Load Alliance product Open frame TH or SMT termination Auto-Track™ Sequencing Margin Up/Down Controls Remote sense compensation Output
Voltage Adjust (Resistor Programming) Under
Voltage Lockout Pre-Biased start-up Output On/Off Inhibit -40°C to +85°C Ambient Air Operation Non Isolated module
Over Current Protection
Control
Inhibit Control Negative Logic (OPEN = Normal Operation) (GROUND = Function Active) See output range on page 2 ±5% VO,NOM (See Note 5)
Output
Voltage Adjust Output Margin Output Auto-Track™
Environmental
Ambient air operating temperature range: -40°C to +85°C Storage temperature: -40°C to +125°C Demonstrated MTBF: 3.9M Hrs Specifications subject to change without notice
Safety
UL, cUL 60950 Recognition EN 60950 though TUV or VDE (Pending)
2
North America (USA): 1-888-41-ASTEC
Europe (UK): 44 (1384) 842-211Asia (HK): 852-2437-9662
AMERICAS 5810 Van Allen Way Carlsbad, CA 92008 Telephone: 760-930-46...