ASM5P23S04A

September 2005 www.DataSheet4U.com rev 1.3 ASM5P23S04A 3.3V ‘SpreadTrak’ Zero Delay Buffer Features ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ Zero input - output propagation delay, adjustable by capacitive load on FBK input. Multiple configurations - Refer “ASM5P23S04A Configurations Table”. Input frequency range: 15MHz to 133MHz Multiple low-skew outputs. Output-output skew less than 200pS. Device-device skew less than 500pS. Two banks of two outputs each. Less than 200pS Cycle-to-cycle jitter (-1, -1H, -2, -2H). Available in space saving, 8 pin 150-mil SOIC package. 3.3V operation. Advanced 0.35µ CMOS technology. Industrial temperature available. ‘SpreadTrak’. the REF pin. The PLL feedback is required to be driven to FBK pin, and can be obtained from one of the outputs. The input-to-output propagation delay is guaranteed to be less than 250pS, and the output-to-output skew is guaranteed to be less than 200pS. The ASM5P23S04A has two banks of two outputs each. Multiple ASM5P23S04A devices can accept the same input clock and distribute it. In this case the skew between the outputs of the two devices is guaranteed to be less than 500pS. The ASM5P23S04A (Refer is available in two different configurations “ASM5P23S04A Configurations Table). The ASM5P23S04A-1 is the base part, where the output frequencies equal the reference if there is no counter in the feedback path. The ASM5P23S04A-1H is the high-drive version of the -1 and the rise and fall times on this device are much faster. Funct...