AR2500 THRU AR2510
AUTOMOTIVE RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 25.0 Amperes
Features
Low ...
AR2500 THRU AR2510
AUTOMOTIVE RECTIFIER Reverse
Voltage - 50 to 1000 Volts Forward Current - 25.0 Amperes
Features
Low cost Low leakage Low forward
voltage drop High current capability
Mechanical Data
Copper heat sink Tin-plated slug easy for soldering Encapsulated by UL94V-0 rate (flame retardant) plastic
DIM ENSIONS DIM A B C D inches Min. 0.235 0.165 0.380 0.215 Max. 0.250 0.185 0.410 0.225 Min. 6.0 4.2 9.7 5.5 mm Max. 6.4 4.7 10.4 5.7 Note
Maximum Ratings and Electrical Characteristicss
Ratings at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.
Symbols
AR 2500
AR 2501
AR 2502
AR 2504
AR 2506
AR 2508
AR 2510
Units
Marking colcr Maximum repetitive peak reverse
voltage Maximum RMS
voltage Maximum DC blocking
voltage Maximum average forward rectified current at TC=150 Peak forward surge current 8.3mS single half sine-wave superimposed on rated load (MIL-STD-750D 4066 method) Maximum instantaneous forward
voltage at 25.0A DC Maximum DC reverse current at rated DC blocking
voltage TA=25 @TC=100 VRRM VRMS VDC IO IFSM VF IR R
JA
Violet 50 35 50
Brown 100 70 100
Red 200 140 200
Yellow 400 280 400 25.0 400.0 1.0 25.0 500.0 1.0 -65 to +175
Blue 600 420 600
Silver 800 560 800
Gold 1000 700 1000 Volts Volts Volts Amps Amps Volts A /W
Typical thermal resistance (Note 1) Operating and storage temperature range
Note: (1) Enough heat sink must be considered in ap...