Technology Licensed from International Rectifier
APU1206/APU1207/APU1208/APU1209
www.DataSheet4U.com
1A VERY LOW DROPO...
Technology Licensed from International Rectifier
APU1206/APU1207/APU1208/APU1209
www.DataSheet4U.com
1A VERY LOW DROPOUT POSITIVE FIXED AND ADJUSTABLE REGULATORS DESCRIPTION
The APU1206 family of devices are ultra low dropout 1A regulators using PNP transistor as the pass element. These products are ideal when a single input supply is only available and the dropout
voltage is less than 1V, exceeding the minimum dropout characteristics of NPN/ PNP hybrid regulators. One common application of these regulators is where input is 3.3V and a 2.5V output is needed. Besides the low dropout of less than 0.5V, other features of the family of the parts are: micro-power shutdown capability and output UVLO detection where Flag pin is switched low when output is below 5% of its nominal point.
FEATURES
Low Dropout
Voltage (500mV at 1A) 1%
Voltage Reference Accuracy Low Ground Current 1µA Maximum Quiescent Current in Shutdown (APU1207, APU1208) Fast Transient Response Current Limit and Thermal Shutdown Error Flag Signal for Output out of Regulation (APU1207, APU1208) RoHS Compliant
APPLICATIONS
2.5V Supply from 3.3V Input for the new generation of Logic ICs Computer Mother Board, Add-On Cards High Efficiency Post Regulator in Switch Mode Power Supply (SMPS)
TYPICAL APPLICATION
VOUT
3
C2
VOUT
APU1206XX Gnd 2
VIN
1
VIN
C1
Figure 1 - Typical application of the 1206-XX in a 3-Pin SOT-223 package.
Data and specifications subject to change without notice.
200706062-1/9
www.DataSheet...