APL5930
3A, Ultra Low Dropout (0.23V Typical) Linear Regulator
Features
General Description
• Compatible with APL591...
APL5930
3A, Ultra Low Dropout (0.23V Typical) Linear Regulator
Features
General Description
Compatible with APL5913
The APL5930 is a 3A ultra low dropout linear regulator.
Ultra Low Dropout
The IC needs two supply
voltages, one is a control
voltage
- 0.23V(typical) at 3A Output Current
Low ESR Output Capacitor (Multi-layer
Chip
Capacitors (MLCC)) Applicable
0.8V Reference
Voltage High Output Accuracy
(V ) for the control circuitry, the other is a main supply CNTL
voltage (V ) for power conversion, to reduce power dissiIN
pation and provide extremely low dropout
voltage. The APL5930 integrates many functions. A Power-OnReset (POR) circuit monitors both supply
voltages on VCNTL and VIN pins to prevent erroneous operations.
- ±1.5% over Line, Load, and Temperature Range The functions of thermal shutdown and current-limit pro-
Fast Transient Response
tect the device against thermal and current over-loads. A
Adjustable Output
Voltage
POK indicates the output
voltage status with a delay time
Power-On-Reset Monitoring on Both VCNTL and set internally. It can control other converter for power
VIN Pins
sequence. The APL5930 can be enabled by other power
Internal Soft-Start
systems. Pulling and holding the EN
voltage below 0.4V
Current-Limit and Short Current-Limit Protections shuts off the output.
Thermal Shutdown with Hysteresis
The APL5930 is available in a SOP-8P package which features small size as SOP-8 and an Exposed Pad to
Open-Dra...