AP1704

3-Pin Microprocessor Reset Circuits AP1701/2/3/4 „ Features - Precision Monitoring of +3V, +3.3V, and +5V Power-Supply Voltages - Fully Specified Over Temperature - Available in Three Output Configurations - Push-Pull RESET Low Output (AP1701/3) - Push-Pull RESET High Output (AP1702/4) - 140ms min Power-On Reset Pulse Width - 12µA Supply Current - Guaranteed Reset Valid to VCC = +1V - Power Supply Transient Immunity - No External Components - 3-pin SOT23 package „ Applications - Computers - Controllers - Intelligent Instruments - Critical µP and µC Power Monitoring - Portable/Battery Powered Equipment - Automotive „ General Description The AP1701/2/3/4 are used for microprocessor (µP) supervisory circuits to monitor the power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with +5V, +3.3V, +3.0V powered circuits. These circuits perform a single function: they assert a reset signal whenever the VCC supply voltage declines below a preset threshold, keeping it asserted for at least 140ms after VCC has risen above the reset threshold. Reset thresholds suitable for operation with a variety of supply voltages are available. The AP1701/2/3/4 have push pull outputs. The AP1701/3 have an active low RESET output, while the AP1702/4 has an active high RESET output. The reset comparator is designed to ignore fast transients on VCC, and the outputs are guaranteed to be in the correc...