AMP1009

www.DataSheet4U.com Motion-Detecting Sensor (AMP) MOTION-DETECTING SENSOR (PASSIVE INFRARED TYPE) Highly sensitive type 24×24 mm .945×.945 inch High detection ability This sensor is a stable, sensitive sensor that detects 2°C 3.6°F temperature changes regardless of the location or speed of the subject. In other words, this sensor ensures detection whether a person is at the edge of the detection area or in the middle, regardless of how fast they are moving. Low current consumption The standard model consumes 260 µA (during stand-by), while the low consumption current type consumes 30 µA (during stand-by). This makes battery operation possible. Wide operation voltage range (2.6 to 5.5 V DC) The usable range extends from a standard 5 V DC for microcomputers to 3 V DC and 4.5 V DC for battery operation. Ex. AMP DataSheet4U.com 0 Current consumption 0: Standard type 1: Low current consumption type 9 Lead wire 0: No lead wire type Operating voltage 9: 2.6 to 5.5 V DC AMP Series Varied operation in accordance with the surrouding brightness If used together with a brightness sensor (CdS), you can make the sensor operate only during bright hours or dark hours. Output time can easily be changed By simply changing the resistor attached to the outside of the sensor, the output time can be changed from approximately 10 seconds to 6 minutes. FEATURES Detects even slight motion of a person (e.g. a 20 cm 7.87 inch movement of the hand) With our unique motion detector—highly s...