High Dynamic Range Dual Amplifier
AH11
High Dynamic Range Dual Amplifier
Applications
Mobile Infrastructure Defense / Homeland Security Fixed Wirele...
Description
AH11
High Dynamic Range Dual Amplifier
Applications
Mobile Infrastructure Defense / Homeland Security Fixed Wireless
Product Features
150 – 3000 MHz +44 dBm OIP3 (1900 MHz, balanced circuit) Single-ended performance:
13.5 dB Gain 2.7 dB Noise Figure +21 dBm P1dB Single +5 Volt Supply Lead-free / RoHS-compliant SOIC-8 package
SOIC-8 package
Functional Block Diagram
General Description
The AH11 is a high linearity amplifier for use in digital communication systems. It combines low noise figure and high intercept point into a low-cost SMT solution. This device extends the linear efficiency advantages of TriQuint’s AH1 to higher power levels by combining two internally matched die. This dual-amplifier configuration allows for the optimal design of balanced or push-pull operation. The amplifier can also be used for single-ended operation in each branch of a diversity receive system.
A mature and reliable GaAs MESFET technology is employed to maximize linearity while achieving low noise figure. The SOIC-8 package is lead-free /RoHS-compliant package and is thermally enhanced to achieve an MTTF greater than 100 years at a case temperature of 85C. All devices are 100% RF and DC tested.
Pin Configuration
Pin No.
1 2, 3, 6, 7 4 5 8 Backside Paddle
Function
RF In (Amp 1) RF/DC GND RF In (Amp 2) RF Out (Amp 2) RF Out (Amp 1) RF/DC GND
Data Sheet: Rev A 0 6/23/11 © 2011 TriQuint Semiconductor, Inc.
Ordering Information
Part No.
AH11-G
Description
High Dynam...
Similar Datasheet