EMI FILTER PROTECTION HYBRID
PD-94598B
AFM704A SERIES
AFM
Description
The AFM704A is a combined EMI filter and protect...
EMI FILTER PROTECTION HYBRID
PD-94598B
AFM704A SERIES
AFM
Description
The AFM704A is a combined EMI filter and protection module intended to be used with AHE, ATO, ATR, ATW, AHF, ASA, and AHV DC/DC converters to allow full compliance with the surge requirements of MIL-STD-704A.This device will reduce reflected ripple current to levels below the CEO3 limits and protect against
voltage spikes required by CS06 testing as specified by MIL-STD-461. Four levels of military screening are available, including fully compliant (per MIL-PRF-38534) devices. Standard Military Drawings (SMDs) available.
Features
40 watts throughout 40 dB Noise Reduction@100 kHz -55°C to +125°C Operation Full Military Screening All Ceramic Capacitor Design Output
Voltage Regulate to 50 Volts Maximum Inrush Current Limiting Under
Voltage Lockout
+ Input 1
Inhibit Input 6 Input Return 5
Snubber
AFM704A Block Diagram
Series Protection
Charge Pump
CONTROLLER UV Lockout OV Clamp Oscillator
Refer to page 3 for Pin Designation Table 1
Micross Components
2 + Output
Case 3 Ground
4
Output Return
2016-05-18
AFM704A SERIES
Specifications Tcase = -55ºC to +125ºC,Vin = +28VDC unless otherwise specified
Parameter Input
voltage
Condition
Continuous No load 40 watt Transient
100 ms, Rs*= 0 Ohms 60 ms, Rs*= 0.5 Ohms 20 s, Rs*= 50 Ohms
Min.
0 16
Typ.
28 28
Under
voltage lockout
13
Input current
No load Inhibited
Inhibit pin
voltage
Open circuit
4.0
Inhibit pin current Output ...