ADN2928

www.DataSheet4U.com XFP Single Chip Transceiver IC Preliminary Technical Data FEATURES Fully integrated limiting amplifier and signal conditioner transceiver IC Meets XFP Telecoms and Datacoms module requirements Supports OC-192, OC-192-FEC, 10GE, 10GFC, 10GE G.709 Line and system loop-back modes Integrated Rx limiting amplifier with 10 mV sensitivity Tx path equalizer for up to 12 inches of FR4 Rx loss of signal (LOS) detector CML serial data interface Supply power: 760 mW 3.3 V and 1.8 V power supplies XFI signalling Flip-chip, 49-pin BGA, 6 mm × 6 mm package Temperature range 0°C to 85°C Power down mode ADN2928 PRODUCT OVERVIEW The ADN2928 provides the transmit and receive functions of quantization, loss of signal detect, and clock and data recovery at rates from 9.953 Gbps to 11.1 Gbps. The part is designed with the flexibility to allow it to be used in either Telecoms or Datacoms XFP module applications. The key advantages of this circuit’s delay and phase-locked loop architecture are that it provides a low jitter transfer bandwidth of 1 MHz, while also exceeding the jitter tolerance requirements of XFP, SONET, Gigabit Ethernet and Fibre Channel. The architecture also provides fundamentally 0 dB of Jitter peaking. APPLICATIONS XFP MSA module receive/transmit signal conditioner SONET OC-192, (+FEC) transponders 10 gigabit Ethernet optical transceivers 10 gigabit small form factor modules Test equipment Serial backplane applications XFP MODULE 12” FR4 TXDATA OTX ORX X...