400MHz to 1.2GHz Active Receive Mixer
www.DataSheet4U.com
Preliminary Technical Data
FEATURES
Broadband RF Port: 400 MHz – 1.2 GHz Conversion Gain: 4 dB Nois...
Description
www.DataSheet4U.com
Preliminary Technical Data
FEATURES
Broadband RF Port: 400 MHz – 1.2 GHz Conversion Gain: 4 dB Noise Figure: 11 dB Input IP3: +24 dBm Input P1dB: +8 dBm LO Drive: 0 dBm External Control of Mixer Bias for Low Power Operation Single-ended, 50Ω RF and LO Input Ports Single Supply Operation: 5 V @ 90 mA Power Down Mode Exposed Paddle Chip Scale Package: 3 x 3 mm
Active Receive Mixer 400 MHz – 1.2 GHz AD8344
VPDC PWDN EXRB 12 11 BIAS 10 COMM 9
COMM 13
8
COMM
RFCM 14
7
IFOP
RFIN 15
6
IFOM
APPLICATIONS
Cellular Base Station Receivers ISM Receivers Radio Links RF Instrumentation
VPMX 16
5
COMM
1
2
3 LOIN
4 COMM
VPLO LOCM
GENERAL DESCRIPTION
The AD8344 is a high-performance, broadband active mixer. It is well suited for demanding receive-channel applications that require wide bandwidth on all ports and very low intermodulation distortion and noise figure. The AD8344 provides a typical conversion gain of 3dB at 900MHz. The integrated LO driver supports a 50-Ω input impedance with a low LO drive level, helping to minimize external component count. The single-ended 50-Ohm broadband RF port allows for easy interfacing to both active devices and passive filters. The RF input accepts input signals as large as 1.8Vpp or 9dBm (re: 50 Ω) at P1dB.
The open-collector differential outputs provide excellent balance, and can be used with a differential filter or IF amplifier such as the AD8369 or AD8351. These outputs may also be converted to a single-ended...
Similar Datasheet