AD722

a FEATURES Low Cost, Integrated Solution +5 V Operation Accepts FSC Clock or Crystal, or 4FSC Clock Composite Video and Separate Y/C (S-Video) Outputs Minimal External Components: No External Filters or Delay Lines Required Onboard DC Restoration Accepts Either HSYNC & VSYNC or CSYNC Phase Lock to External Subcarrier Drives 75 Ω Reverse-Terminated Loads Logic Selectable NTSC or PAL Encoding Modes Compact 16-Pin SOIC APPLICATIONS RGB to NTSC or PAL Encoding RGB to NTSC/PAL Encoder AD722 The AD722 accepts either FSC or 4FSC clock. When a clock is not available, a low cost parallel-resonant crystal (3.58 MHz (NTSC) or 4.43 MHz (PAL)) and the AD722’s on-chip oscillator generate the necessary subcarrier clock. The AD722 also accepts the subcarrier clock from an external video source. The interface to VGA Controllers and MPEG Video Decoders is simple: an on-chip logic “XNOR” accepts the available vertical (VSYNC) and horizontal sync (HSYNC) signals and creates the composite sync (CSYNC) signal on-chip. If available, the AD722 will also accept a standard CSYNC signal by connecting VSYNC to +5 V and applying CSYNC to HSYNC pin. The AD722 contains decoding logic to identify valid HSYNC pulses for correct burst insertion. Delays in the U and V chroma filters are matched by an on-chip sampled-data delay line in the Y signal path. To prevent aliasing, a prefilter at 5 MHz is included ahead of the delay line and a post-filter at 5 MHz is added after the delay line to suppress harmonics i...