REVISIONS LTR A DESCRIPTION Change to military drawing format. Changes to output adjustment range. Add conditions for lo...
REVISIONS LTR A DESCRIPTION Change to military drawing format. Changes to output adjustment range. Add conditions for load regulation test at -55GC and +125GC. Change group A subgroups for load regulation and line regulation tests, and output
voltage temperature coefficient. Add vendor CAGE 64155. Editorial changes throughout. Add vendor CAGE 07933. Add vendor CAGE 54186. Add case outline 2. Change output
voltage temperature coefficient test limits. Add device type 02. Editorial changes throughout. Delete vendors CAGEs 54186 and 07933. Add vendor CAGE 1ES66. Add class V devices. Replace CAGE 06665 with 24355. Add case outline H and TABLE IIB. Make changes to 1.2.2 and TABLE II. Add radiation hardness assurance requirements. - ro Make changes to 1.5, table IIA, 4.4.1b, and output
voltage temperature coefficient test as specified in table I. - ro Add device types 03 and 04. Make changes 1.2.2 and to the output
voltage noise test as specified under TABLE I. - ro DATE (YR-MO-DA) 88-03-17 APPROVED M. A. FRYE
B
89-04-12
M. A. FRYE
C
92-11-25
M. A. FRYE
D
97-06-10
R. MONNIN
E F
98-08-07 00-01-21
R. MONNIN R. MONNIN
G
01-02-07
R. MONNIN
THE ORIGINAL FIRST SHEET OF THIS DRAWING HAS BEEN REPLACED.
CURRENT CAGE CODE 67268 REV SHEET REV SHEET REV STATUS OF SHEETS PMIC N/A REV SHEET PREPARED BY JOSEPH A. KERBY G 1 G 2 G 3 G 4 G 5 G 6 G 7 G 8 G 9 G 10 G 11
STANDARD MICROCIRCUIT DRAWING
THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS AND AGENCIES OF THE DEPARTMENT OF ...