385XBX-48D

385 Mechanical Latching Relay/DPDT to 6PDT, 15 Amp Rating 0.187” Quick Connect Terminals Switch Up to 6 Poles www.DataSheet4U.com Easy DIN Rail or Flange Mounting (UL 508) Units A V Resistive Resistive HP HP mA V V VA W The 385 relay is a mechanically latched, electrically reset relay. It can be furnished with two, four or six sets of double throw contacts. The molded, plastic dust cover snaps onto a standard DIN rail as well as incorporating mounting slots for panel mounting. The 385 does not have a dominant coil. If both coils are energized at the same time, all of the normally open contacts close and all normally closed contacts open. If one coil, (Coil A) is de-energized, then the contacts on the opposite side (Coil B) will not transition until coil power is restored to the first coil (A). General Specifications Contact Characteristics Number and type of Contacts Contact materials Thermal (Carrying) Current Maximum Switching Voltage Switching Current @ Voltage ~ ~ ~ ~ % of Nominal Minimum Switching Requirement Coil Characteristics Voltage Range Operating Range Average consumption Drop-out voltage threshold Performance Characteristics Electrical Life (UL508) Mechanical Life Operating time (response time) Dielectric strength Environment Product certifications Ambient air temperature around the device Vibration resistance Shock resistance Degree of protection Weight Operations @ Rated Current Unpowered Between coil and contact Between poles Between contacts Standar...