2.2K3A1A Datasheet
BetaTHERM Sensors
BetaCurve Interchangeable Thermistor Series I
Thermistor Configuration
32 AWG Tin Plated Copper Alloy Lead Wires
Thermally Conductive Epoxy Coating
2.413mm (0.095Ó) Max. Dia.
76.2mm +/-3.3mm (3.00Ó +/-0.13Ó)
Example: BetaCURVE Series I Part Number
10K 3 A 1 A
Tolerance Classification
BetaCURVE Series
Epoxy Coated
Material Curve # Resistance Value
@
25oC
BetaCurve Interchangeable Thermistor Series I
Applications
¥ Temperature sensing, control and compensation.
¥ Medical equipment and patient monitoring.
¥ Aerospace instrumentation and crystal oscillator compensation.
¥ Liquid or gas temperature control and monitoring.
¥ Assembly into probes for a wide variety of applications.
Features
¥ Rapid Time Response (1 second typical in liquids). ¥ DC (Dissipation Constant) = 0.75mW/oC typical in
still air at 25oC. ¥ Min./Max. Temperature Exposure = -80oC to 150oC.
¥ Available in custom probe assemblies.
¥ Proven Stability and Reliability.
¥ Alloy Lead Wires for re.
BetaTHERM Sensors
BetaCURVE Interchangeable Thermistor Series IV
BetaCURVE Interchangeable Series IV
Applications:
Photo ?
¥ Temperature sensing, control and compensation. ¥ Applications where a Dissipation Constant of 3.0
mW/oC is required.
Thermistor Configuration
28 AWG Tin Plated Copper Lead Wires
Thermally Conductive Epoxy Coating
2.794mm (0.110") Max. Dia.
Features:
¥ Rapid Time Response (1.5 second, typical in liquids). ¥ DC (Dissipation Constant) = 3.0mW/oC
typical in still air at 25oC. ¥ Min./Max. Temperature Exposure = -80oC to 150oC. ¥ Available in custom probe assemblies. ¥ Proven Stability and Reliability
45.7mm +/-5.0mm (1.80" +/-0.20")
Example: BetaCURVE Series IV .
BetaTHERM Sensors
BetaCURVE Interchangeable Thermistor Series III
BetaCURVE Interchangeable Thermistor Series III
Applications
¥ Temperature sensing, control and compensation. ¥ Applied to applications where higher Dissipation
Constant is required (2.0mW/oC).
Thermistor Configuration
30 AWG Tin Plated Copper Alloy Lead Wires
Thermally Conductive Epoxy Coating
2.413mm (0.095Ó) Max. Dia.
45.7mm +/-5.0mm (1.80Ó +/-0.20Ó)
Example: BetaCURVE SeriesIII Part Number
10K 3 A 1 W2
2mW/oC Dissipation Constant
BetaCURVE Series
Epoxy Coated
Material Curve # Resistance Value
@
25oC
Features
¥ Rapid Time Response (1.3 second typical in liquids). ¥ DC (Dissipation Constant) = 2.0mW/oC typical.
BetaTHERM Sensors
BetaCurve Interchangeable Thermistor Series II
BetaCurve Interchangeable Thermistor Series II
.
Thermistor Configuration
30 AWG Sliver Plated Copper Lead Wires With Etched TFE Telfon Insulation,
Thermally Conductive Epoxy Coating
12.7mm +/-3.3mm (0.50Ó +/-0.13Ó)
76.2mm +/-3.3mm (3.00Ó +/-3.13Ó)
2.413mm (0.095Ó) Max. Dia.
Example: BetaCURVE Series II Part Number
10K 3 A 1 I A
Tolerance Classification
Insulated Lead Wires
BetaCURVE Series
Epoxy Coated
Material Curve # Resistance Value
@
25oC
Applications ¥ Temperature sensing, control and compensation. ¥ P.C. board mounting for over temperature
protection. ¥ Automotive car seat heater control and engine
manag.
BetaTHERM Sensors
BetaCURVE Medical Grade Thermistor Series VI:
BetaCURVE Medical Grade Thermistor Series VI:
Photo ?
Applications
¥ Oxygen sensing equipment and instruments. ¥ Esophageal Catheters ¥ Skin sensors ¥ Oral and Rectal Probes ¥ Pharmaceutical manufacturing equipment
Features
Thermistor C onfiguration
32 AWG Tin Plated Copper Alloy Lead Wires
Thermally Conductive Epoxy Coating
2.413mm (0.095") Max. Dia.
76.2mm +/-3.3mm (3.00" +/-0.13")
Example: BetaCURVE Series VI Part Number
10K 4 A 1 AM
Medical Grade Classification
BetaCURVE Series
Epoxy Coated
Material Curve # Resistance Value
@
25oC
¥ Rapid Time Response (1 second typical in liquids). ¥ DC (Dissipation Consta.
Chip Thermistors
BetaTHERM Sensors
BetaCurve Interchangeable Thermistor Series I
Thermistor Configuration
32 AWG Tin Plated Copper Alloy Lead Wires
Thermally Conductive Epoxy Coating
2.413mm (0.095Ó) Max. Dia.
76.2mm +/-3.3mm (3.00Ó +/-0.13Ó)
Example: BetaCURVE Series I Part Number
10K 3 A 1 A
Tolerance Classification
BetaCURVE Series
Epoxy Coated
Material Curve # Resistance Value
@
25oC
BetaCurve Interchangeable Thermistor Series I
Applications
¥ Temperature sensing, control and compensation.
¥ Medical equipment and patient monitoring.
¥ Aerospace instrumentation and crystal oscillator compensation.
¥ Liquid or gas temperature control and monitoring.
¥ Assembly into probes for a wide variety of applications.
Features
¥ Rapid Time Response (1 second typical in liquids). ¥ DC (Dissipation Constant) = 0.75mW/oC typical in
still air at 25oC. ¥ Min./Max. Temperature Exposure = -80oC to 150oC.
¥ Available in custom probe assemblies.
¥ Proven Stability and Reliability.
¥ Alloy Lead Wires for reduced thermal conductivity ("stem effect").
¥ Choice of 4 temperature tolerance classifications.
Tolerance Code: A B C D
Specification: +/-0.1oC, 0oC to 70oC +/-0.2oC, 0oC to 70oC +/-0.5oC, 0oC to 70oC +/-1.0oC, 0oC to 70oC
The BetaCURVE Thermistor Series I are small epoxy coated devices with solid tin plated lead wires. The series offers a choice of precision temperature tolerance classifications for a wide variety of customer applications, such as temperature measurements, temperature indic.
2015-02-03 : ZS1R5 AGN2004H AGN20006 AGN20009 AGN20012 AGN20024 AGN2101H AGN21003 AGN2104H AGN21006