1N4000A Datasheet
Part Number |
1N4000A |
Manufacturers |
Digitron Semiconductors |
Logo |
|
Description |
ZENER DIODES |
Datasheet |
1N4000A Datasheet (PDF) |
1N2970-1N3015B, 1N3993-1N4000A
High-reliability discrete products and engineering services since 1977
10 WATT ZENER DIODES
FEATURES Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix.
MAXIMUM RATINGS Parameter
Junction temperature Storage temperature DC power dissipation Power derating Forward voltage Thermal resistance Solder temperature
-65°C to +175°C -65°C to +200°C 10 watts 80 mW/°C above 50°C @ 2.0 A: 1.5 volts 10°C/W (typical) junction to case (stud) 260°C for 10 s (max)
Value
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise specified)
Part number (note 1)
Nominal zener voltage VZ @ IZT (note 2)
Zener test current (IZT)
Max. dynamic impedance (note 3)
Max DC zener current (IZM) @ 75°C stud temp (note 4)
1N3993A 1N3994A 1N3995A 1N3996A 1N3997A 1N3998A 1N3999A 1N4000A 1N2970B 1N2971B 1N.
http://www.Datasheet4U.com
.
S O LID
STAT E
INC.
1N3993 – 1N4000
Your TOTAL solutions source!
10 WATTS ZENER DIODES
DO4
ZENER DIODES Low-voltage, alloy-junction zener diodes in hermetically sealed package with cathode connected to case. Polarity: Cathode-to-case (reverse polarity units are available and designed by an "R"suffix.
MAXIMUM RATINGS: Junction and Storage Temperature: -65°C to + 175°C DC Power Dissipation: 10 Watts (Derate 83.3 mW/°C above 55°C) The type numbers shown in the table have a standard tolerance on the nominal zener volta ge of + 10%. A standard tolerance of +5% on individual units is also available and is indicated by suffixing "A" to the standard type number.
S O LID
S T A T E 46 Farrand.
Part Number |
1N4000 |
Manufacturers |
Microsemi Corporation |
Logo |
|
Description |
ZENER DIODES |
Datasheet |
1N4000 Datasheet (PDF) |
1N2970 thru 1N3015B and 1N3993 thru 1N4000A
10 WATT ZENER DIODES
SCOTTSDALE DIVISION
DESCRIPTION These high power 10 W Zener diodes represented by the JEDEC registered 1N2970 thru 1N3015B and 1N3993 thru 1N4000A series provide voltage regulation in a selection over a 3.9 V to 200 V broad range of voltages. They may be operated up to 10 W with adequate mounting and heat sinking with their low thermal resistance. These Zeners are also available in JAN, JANTX, JANTXV military qualifications. Microsemi also offers numerous other Zener products to meet higher and lower power applications.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
APPEARANCE
WWW.
ZENER DIODES
1N2970-1N3015B, 1N3993-1N4000A
High-reliability discrete products and engineering services since 1977
10 WATT ZENER DIODES
FEATURES Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix.
MAXIMUM RATINGS Parameter
Junction temperature Storage temperature DC power dissipation Power derating Forward voltage Thermal resistance Solder temperature
-65°C to +175°C -65°C to +200°C 10 watts 80 mW/°C above 50°C @ 2.0 A: 1.5 volts 10°C/W (typical) junction to case (stud) 260°C for 10 s (max)
Value
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise specified)
Part number (note 1)
Nominal zener voltage VZ @ IZT (note 2)
Zener test current (IZT)
Max. dynamic impedance (note 3)
Max DC zener current (IZM) @ 75°C stud temp (note 4)
1N3993A 1N3994A 1N3995A 1N3996A 1N3997A 1N3998A 1N3999A 1N4000A 1N2970B 1N2971B 1N.
2017-05-17 : 2N3739 1N6487 1N6491 1N4462 1N4464 1N4706UR 1N4710UR 1N6485 1N4704UR 1N4700UR