1.5KE6.8-1.5KE400A
High-reliability discrete products and engineering services since 1977
1500 WATT TRANSIENT VOLTAGE ...
1.5KE6.8-1.5KE400A
High-reliability discrete products and engineering services since 1977
1500 WATT TRANSIENT
VOLTAGE SUPPRESSORS
FEATURES Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix.
Voltages from 6.8 to 400 V Breakdown (VBR)
Suppresses transients up to 1500 watts @ 10/1000 μs (see Figure 1)
MAXIMUM RATINGS Parameter
Peak Pulse Power Dissipation at 25°C: Impulse Repetition Rate (duty factor): Tclamping (0 volts to V(BR) min): Operating and Storage Temperature: Thermal Resistance:
Steady-State Power Dissipation:
Forward Surge: Solder Temperature:
Value 1500 watts @ 10/1000μs 0.01% <100 ps theoretical for unidirectional and <5 ns for bidirectional -65°C to +150°C 22°C/W junction to lead at 3/8”(10mm) from body, or 82°C/W junction to ambient when mounted on FR4 PC board with 4mm2 copper pads (1oz) and track width 1mm, length 25mm 5 watts at TL=40°C or 1.52 watts @ TA=25°C when mounted on FR4 PC board described for thermal resistance 200 Amps peak impulse of 8.3ms half-sine wave at 25°C (unidirectional only) 260°C for 10 s (maximum)
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise specified)
Type Number
Rated Standoff
Voltage
VWM (Note 1)
Volts
Breakdown
Voltage
V(BR) @ l(BR)
Volts Volts
mA
Min
Max
Maximum Clamping
Voltage VC @ lPP
Volts
1.5KE6.8
5.50
6.12
7.48
10
10.8
1.5KE6.8A
5.80
6.45...