5000W Transient Voltage Suppressor
5KP-HF Series
Breakdown Voltage: 6. 8 to 440 Volts Peak Pulse Power: 5000 Watts RoHS Device Halogen Free
Features
- Glass passivated chip. - 5000W peak pulse power capability with a 10/1000µs
waveform, repetitive rate (duty cycle):0. 01% - Low leakage. - Uni and Bidirectional unit. - Excellent clamping capability. - Very fast response time. - UL recognized file # E349157 R - Range: 5KP5. 0(C)A thru. 5KP190(C)A
5KP5. 0(C)A-HF
Mechanical Data
-Case: Molded plastic.
-Epoxy: UL 94V-0 rate flame retardant
-Lead: Solderable per MIL-STD-202, method 208 guranteed.
-Polarity: Color band denotes cathode end except Bipolar.
-Mounting position: Any
R-6
1. 0(25. 4) MIN.
0. 052(1. 32) 0. 048(1. 22) DIA.
0. 360(9. 14) 0. 340(8. 64)
1. 0(25. 4) MIN.
0. 360(9. 14) 0. 340(8. 64)
DIA.
Dimensions in inches and (millimeter)
Maximum Ratings and Electrical Characteristics
Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive loaded. For capacitive load, derated current by 20%.
Parameter
Symbol
Value
Peak power dissipation with a 10/1000μs waveform (Note 1)
PPP
5000
Peak pulse current with a 10/1000μs waveform (Note 1)
IPP
See Next Table
Unit W A
Power dissipation on infinite heatsink at TL=75°C
PD
8. 0
W
Peak forward surge current, 8. 3ms single half sine-wave unidirectional only (Note 2)
IFSM
500
Maximum instantaneous forward voltage at 100A for uni-directional devices only (Note 3)
VF
3. 5 / 5. 0
Operating junction and storage temperature range
TJ, TSTG
-55 to +150
NTOES:
(1) Non-repetitive current pulse, per fig. 5 and derated above TA=25°C per fig. 1 (2) Measured on 8. 3 ms single half sine wave of equivalent square wave, duty cycle=4 pulses per minute maximum. (3) VF<3. 5V for devices of VBR<200V and VF<5. 0V for devices of VBR>201V
A V °C
Company reserves the right to improve product design , functions and reliability without notice.
QW-JTV03
Comchip Technology CO. , LTD.
REV:C ...