DatasheetsPDF.com

AP2810

BCD
Part Number AP2810
Manufacturer BCD
Description 1.0A High-side Power Distribution Switch
Published Aug 16, 2015
Detailed Description Advance Datasheet 1.0A High-side Power Distribution Switch with Enable and Flag AP2810 General Description The AP2810...
Datasheet PDF File AP2810 PDF File

AP2810
AP2810


Overview
Advance Datasheet 1.
0A High-side Power Distribution Switch with Enable and Flag AP2810 General Description The AP2810 is an integrated high-side power switch that consists of N-Channel MOSFET, charge pump, over current & temperature and other related protection circuits.
The switch’s low RDS (ON), 60mΩ, design easily to meet USB voltage drop requirements.
It includes soft-start to limit inrush current, over-current protection, load short protection with fold-back, and thermal shutdown to avoid switch failure during hot plug-in.
Under voltage lockout (UVLO) function is used to ensure the device remain off unless there is a valid input voltage present.
A Flag output is available to indicate fault conditions to the local USB controller.
The AP2810 is available in standard packages of SOIC-8 and MSOP-8.
Features • Low MOSFET on Resistance: 60mΩ @VIN=5.
0V • Compliant to USB Specifications • Operating Voltage Range: 2.
7V to 5.
5V • Low Supply Current: 65µA (Typ) • Low Shutdown Current: 1.
0µA (Max) • Guarantee 1.
0A Continuous Load • Current Limit: 1.
1A (Min), 2.
1A (Max) • Under-voltage Lockout • Logic Level Enable Pin: Available in Active-high or Active-low Version • Over-current Protection • Over Temperature Protection • Load Short Protection with Fold-back • No Reverse Current When Power off • With Output Shutdown Pull-low Resistor for A/C Versions Applications • USB Power Management • USB Bus/Self Powered Hubs • Hot-plug Power Supplies • Battery-charger Circuits • Notebooks, Motherboard PCs Jul.
2012 Rev 1.
2 SOIC-8 MSOP-8 Figure 1.
Package Types of AP2810 BCD Semiconductor Manufacturing Limited 1 Advance Datasheet 1.
0A High-side Power Distribution Switch with Enable and Flag Pin Configuration AP2810 M/MM Package （SOIC-8/MSOP-8） Figure 2.
Pin Configuration of AP2810 (Top View) Pin Descriptions Pin Number 1 2, 3 4 5 6, 7, 8 Pin Name GND VIN VOUT Function Ground Supply input pin Chip enable control input, active low or high Fault flag pin, output with ope...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)