DatasheetsPDF.com

BA6125

Rohm
Part Number BA6125
Manufacturer Rohm
Description LED level meter driver
Published Apr 14, 2015
Detailed Description Audio ICs LED level meter driver, 5-point, linear scale BA6125 The BA6125 is a driver IC for LED linear level meters in ...
Datasheet PDF File BA6125 PDF File

BA6125
BA6125

Overview
Audio ICs LED level meter driver, 5-point, linear scale BA6125 The BA6125 is a driver IC for LED linear level meters in stereo equipment and other display applications.
The IC displays the input level on five LEDs.
The display level range is 35mVrms to 175mVrms in five equally-spaced 35mVrms steps.
The BA6125 includes a rectifier amplifier allowing direct AC input, and has constant-current outputs, so it can directly drive the LEDs without variations in LED current due to supply voltage fluctuations.
FApplications Battery checkers, signal meters, and other display devices.
FFeatures 1) Rectifier amplifier allows either AC or DC input.
2) Constant-current outputs for constant LED current when the supply voltage fluctuates.
3) Built-in reference voltage means that power supply voltage fluctuations do not effect the display.
FAbsolute maximum ratings (Ta = 25_c) 4) Wide operating power supply voltage range (3.
5V to 16V) for a wide range of applications.
5) Low PCB space requirements.
Comes in a compact 9-pin SIP package and requires few external components.
624 Audio ICs FBlock diagram BA6125 FElectrical characteristics (unless otherwise noted, Ta = 25_C, VCC = 6.
0V, and f = 1kHz) FMeasurement circuit 625 Audio ICs FApplication example BA6125 The response time (attack and release time) can be changed by varying the values of C1 and R1.
C2 is a coupling capacitor, and the potentiometer VR varies the input level.
Input the voltage level that you desire for the center point, and adjust the potentiometer so that the third LED (VC3) lights.
To reduce the LED current, connect a resistor either in parallel (Fig.
3 (1)) or in series (Fig.
3 (2)) with the LED.
If a resister is connected in series with the LED, the LED current will change if the supply voltage fluctuates.
Note: If the power supply voltage exceeds 9V, insert a resistor in series with the LED current supply line, or connect a heat sink so that the maximum power dissipation Pd Max.
is not exceeded (see...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)