Part Number
|
KP1000A |
Manufacturer
|
ETC |
Description
|
HIGH POWER THYRISTOR |
Published
|
Oct 19, 2014 |
Detailed Description
|
KP1000A/2800V
*...
|
Datasheet
|
KP1000A PDF File
|
Overview
KP1000A/2800V
*
HIGH POWER THYRISTOR FOR PHASE CONTROL APPLICATIONS Features:
.
All Diffused Structure .
Center Amplifying Gate Configuration .
Guaranteed Maximum Turn-Off Time .
High dV/dt Capability .
Pressure Assembled Device
ELECTRICAL CHARACTERISTICS AND RATINGS Blocking - Off State
Device Type VRRM (1) VDRM (1) VRSM (1)
KP1000A
2800
2800
2900
VRRM = Repetitive peak reverse voltage VDRM = Repetitive peak off state voltage VRSM = Non repetitive peak reverse voltage (2)
Repetitive peak reverse leakage and off state leakage Critical rate of voltage rise
IRRM / IDRM dV/dt (4)
10 mA 100 mA (3) 500 V/µsec
Notes: All ratings are specified for Tj=25 oC unless otherwise stated.
(1) All voltage ratings are specified for an applied 50Hz/60zHz sinusoidal waveform over the temperature range -40 to +125 oC.
(2) 10 msec.
max.
pulse width (3) Maximum value for Tj = 125 oC.
(4) Minimum value for linear and exponential waveshape to 80% rated VDRM.
Gate open.
Tj = 125 oC.
(5) Non-repetitive value.
Conducting - on state
Parameter Average value of on-state current RMS value of on-state current Peak one cPSTCle surge (non repetitive) current Symbol IT(AV) ITRMS ITSM 18000 I square t Latching current Holding current Peak on-state voltage Critical rate of rise of on-state current (5) I2t IL 800 IH 400 VTM 2.
15 di/dt 200 A/µs Switching from VDRM ≤ 1000 V, non-repetitive V ITM = 3200 A; mA VD = 24 V; I = 2.
5 A 1.
7x106 A A2s mA Min.
Max.
1000 2000 20000 Typ.
Units A A A Conditions Tc=93oC Nominal value 8.
3 msec (60Hz), sinusoidal waveshape, 180o conduction, Tj = 125 oC 10.
0 msec (50Hz), sinusoidal waveshape, 180o conduction, Tj = 125 oC 8.
3 msec and 10.
0 msec VD = 24 V; RL= 12 ohms
KP1000A/2800V
Gating
Parameter Peak gate power dissipation Average gate power dissipation Peak gate current Gate current required to trigger all units Gate voltage required to trigger all unit...
Similar Datasheet