JOINT BAY SEMICONDUCTOR CO. ,LTD
. +=$3:0%XFN'&'&&RQYHUWHU
z z z z z z z z z z z
LSP312
FEATURES
Output voltage: 3. 3V, 5. 0V, 12V, and adjustable output version Adjustable version output voltage range:1. 23V to 37V±4% 52KHz±15% fixed switching frequency Voltage mode non-synchronous PWM control Thermal-shutdown and current-limit protection ON/OFF shutdown control input Operating voltage can be up to 40V Output load current: 2A Low power standby mode Built-in switching transistor on chip SOP8-EP package
GENERAL DESCRIPTION
z z z
APPLICATIONS
Simple High-efficiency step-down regulator On-card switching regulators Positive to negative converter
The LSP3127 series are monolithic IC that design for a step-down DC/DC converter, and own the ability of driving a 2A load without additional transistor component. Due to reducing the number of external component, the board space can be saved easily. The external shutdown function can be controlled by logic level and then come into standby mode. The internal compensation makes feedback control have good line and load regulation without external design. Regarding protected function, thermal shutdown is to prevent over temperature operating from damage, and current limit is against over current operating of the output switch. The LSP3127 series operates at a switching frequency of 52 KHz thus allowing smaller sized filter components than what would be needed with lower frequency switching regulators. Other features include a guaranteed ±4% tolerance on output voltage under specified input voltage and output load conditions, and ±15% on the oscillator frequency. The output version included fixed 3. 3V, 5V, 12V, and an adjustable type. The package is available in a standard SOP8-EP package.
PIN CONFIGURATION
SOP8-EP (Top View)
PIN DESCRIPTION
Name VIN OUTPUT FB SD GND GND GND GND No. 1 2 3 4 5 6 7 8 Operating Voltage Input Switching Output Output Voltage Feedback Contro...