Dual Rail-to-Rail Operational Amplifiers - GMT
Description
Global Mixed-mode Technology Inc.
G1563
Dual Rail-to-Rail Operational Amplifiers
Features
General Description
The G1563 is the dual rail-to-rail input/output operation amplifiers with the low power, high voltage swing.
Operating on supplies ranging from 4.
5V to 20V, while current consuming only 3mA / per amplifier, the G1563 is with high unit-gain bandwidth of 30MHz.
The G1563 also provides common mode input ability beyond the supply rails, as well as rail-to-rail output capability.
This enables this amplifier to offer maximum dynamic range at any supply voltage.
The G1563 also features fast slewing and settling times, as well as a high output drive capability of 65mA (sink and source).
These features make these amplifiers ideal for high speed filtering and signal conditioning application.
Other applications include battery power, TFT Vcom /Gamma buffers, portable devices, and anywhere low power consumption is important.
There are over temperature and short-circuit current limit protection embedded to avoid the unexpected damages.
The G1563 is available in MSOP-8, TSSOP-8, SOP-8 (FD) and MSOP-8 (FD) package.
Wide Supply Operation Range +4.
5V to +20V Beyond the Rails Input Capability Rail-to-Rail Output Swing Low Supply Current, 3mA / Per Amplifier (Typical) Low Input Offset Voltage 2mV (Typical) Internal Frequency Compensated for Unit Gain Stable Wide Bandwidth (unit gain) 30MHz High Slew Rate = 150V/μs Large DC Voltage Gain 80dB (Typical) ±180mA Output Short Current Embedded Over-Temperature Protection Short-Circuit Current Limit Protection MSOP-8, TSSOP-8, SOP-8 (FD) and MSOP-8 (FD) Package Available
Applications
Portable Equipment TFT Vcom/Gamma buffers Battery-Powered Equipment ASIC Input or Output Amplifier Low Power/Low Voltage Applications
Ordering Information
ORDER NUMBER
G1563P81U G1563D11U G1563F11U G1563F12U G1563F51U Note: P8: MSOP-8 D1: TSSOP-8 1 & 2: Bonding Code U: Tape & Reel
MARKING
G1563 G1563 G1563A G156...
Similar Datasheet
