GS2986 Multi-Rate SDI Reclocker with Equalization & De-emphasis
Features
• • • • • • • • • • SMPTE 424M, SMPTE 292M and SMPTE 259M-C compliant Supports DVB-ASI at 270Mb/s Single supply operation at 3. 3V or 2. 5V 180mW typical power consumption (213mW with RCO enabled) at 2. 5V Input signal equalization and output-signal de-emphasis settings to compensate for board-trace dielectric losses 4:1 input multiplexer patented technology Choice of dual reclocked data outputs or one reclocked data output and one clock output Uses standard 27MHz crystal Cascadable crystal buffer supports multiple reclockers using a single crystal Differential inputs and outputs support DC coupling to industry-standard differential logic on-chip 100Ω differential data input/output termination selectable 400mVppd or 800mVppd output swing on each output seamless interface to other Gennum products 4 wire SPI host interface for device configuration and monitoring Standard logic control and status signal levels Auto and Manual modes for rate selection Standards indication in Auto mode Lock Detect Output Mute, Bypass and Autobypass functions SD/HD indication output to control GS2978 or GS2988 dual slew-rate cable drivers Operating temperature range: -40°C to +85°C Small footprint QFN package (6mm x 6mm) Pb-free and RoHS compliant
Description
The GS2986 is a multi-rate serial digital reclocker designed to automatically recover the embedded clock from a digital video signal and retime the incoming video data. It will recover the embedded clock signal and retime the data from a SMPTE 424M, SMPTE 292M, or SMPTE 259M-C compliant digital video signal. A serial host interface provides the ability to configure and monitor multiple GS2986 devices in a daisy-chain configuration. Adjustable input trace equalization (EQ) for up to 40” of FR4 trace losses, and adjustable output de-emphasis (DE) for up to 20” of FR4 trace losses, can be configured via the host interface. The GS2986 can operate in either aut...