1. 5KE SERIES
Transient Voltage Suppressor Diodes
Voltage Range 6. 8 to 440 Volts 1500 Watts Peak Power 5. 0 Watts Steady State
Features
UL Recognized File # E-96005 Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Exceeds environmental standards of MIL-STD-19500 1500W surge capability at 10 x 100 us waveform, duty cycle: 0. 01% Excellent clamping capability Low zener impedance Fast response time: Typically less than 1. 0ps from 0 volts to VBR for unidirectional and 5. 0 ns for bidirectional Typical IR less than 1uA above 10V High temperature soldering guaranteed: 260°C / 10 seconds / . 375”,(9. 5mm) lead length / 5lbs. ,(2. 3kg) tension
DO-201
Mechanical Data
Case: Molded plastic Lead: Axial leads, solderable per MIL-STD-202, Lead: Method 208 Polarity: Color band denotes cathode except bipolar Weight: 0. 94gram Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%
Type Number
Peak Power Dissipation at TA=25 C, Tp=1ms (Note 1)
O
Symbol PPK PD IFSM VF TJ, TSTG
Value Minimum1500 5. 0 200 3. 5 / 5. 0 -55 to + 175
O
Units Watts Watts Amps Volts °C
Steady State Power Dissipation at TL=75 °C Lead Lengths . 375”, 9. 5mm (Note 2) Peak Forward Surge Current, 8. 3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) (Note 3) Maximum Instantaneous Forward Voltage at 50. 0A for Unidirectional Only (Note 4) Operating and Storage Temperature Range
Notes: 1. Non-repetitive Current Pulse Per Fig. 3 and Derated above TA=25 C Per Fig. 2. Notes: 2. Mounted on Copper Pad Area of 0. 8 x 0. 8” (20 x 20 mm) Per Fig. 4. Notes: 3. 8. 3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 Pulses Per Minutes Notes: 3. Maximum. Notes: 4. VF=3. 5V for Devices of VBR ≤ 200V and VF=5. 0V Max. for Devices VBR>200V. Devices for Bipolar Applications Notes: 1. For ...