DatasheetsPDF.com

MAX5961

Maxim Integrated Products

Hot-Swap Controller - Maxim Integrated Products


MAX5961
MAX5961

PDF File MAX5961 PDF File



Description
www.
DataSheet.
co.
kr 19-4167; Rev 0; 6/08 KIT ATION EVALU E L B AVAILA 0 to 16V, Quad, Hot-Swap Controller with 10-Bit Current and Voltage Monitor General Description The MAX5961 0 to 16V, quad, hot-swap controller provides complete protection for systems with up to four distinct supply voltages.
The device allows the safe insertion and removal of circuit cards into live backplanes.
The MAX5961 is an advanced hot-swap controller that monitors voltage and current with an internal 10-bit ADC.
The device provides two levels of overcurrent circuit-breaker protection; a fast-trip threshold for a fast turn-off, and a lower slow-trip threshold for a delayed turn-off.
The maximum overcurrent circuitbreaker threshold range is set independently for each channel with a trilevel input (ILIM_) or by programming though an I2C interface.
The internal 10-bit ADC is multiplexed to monitor the output voltage and current of each hot-swap channel.
The total time to cycle through all the eight measurements is 100µs (typ).
Each 10-bit value is stored in an internal circular buffer so that 50 past samples of each signal can be read back through the I2C interface at any time or after a fault condition.
The MAX5961 can be configured as four independent hot-swap controllers, hot-swap controllers operating in pairs, or as a group of four hot-swap controllers.
The device also includes five digital comparators per hot-swap channel to implement overcurrent warning, two levels of overvoltage detection, and two levels of undervoltage detection.
The limits for overcurrent, overvoltage, and undervoltage are user-programmable.
When any of the measured values violates the programmable limits, an external ALERT signal is asserted.
In addition to the ALERT signal, depending on the selected operating mode, the MAX5961 can deassert a power-good signal and/or turn-off the external MOSFET.
The MAX5961 is available in a 48-pin thin QFN package and operates over the -40°C to +85°C extended temperature range...



Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)