DatasheetsPDF.com

NCP1338

ON Semiconductor
Part Number NCP1338
Manufacturer ON Semiconductor
Description PWM Controller
Published Feb 24, 2011
Detailed Description DATA SHEET www.onsemi.com PWM Current-Mode Controller for Free Running Quasi-Resonant Operation NCP1338 The NCP1338 com...
Datasheet PDF File NCP1338 PDF File

NCP1338
NCP1338


Overview
DATA SHEET www.
onsemi.
com PWM Current-Mode Controller for Free Running Quasi-Resonant Operation NCP1338 The NCP1338 combines a true current mode modulator and a demagnetization detector which ensures full Borderline/Critical Conduction Mode in any load/line conditions together with minimum drain voltage switching (Quasi−Resonant operation).
The transformer core reset detection is done internally, without using any external signal, due to the Soxyless concept.
The frequency is internally limited to 130 kHz, preventing the controller from operating above the 150 kHz CISPR−22 EMI starting limit.
By monitoring the feedback pin activity, the controller enters skip mode as soon as the power demand falls below a predetermined level.
As each restart is softened by an internal Soft−Skipt, and as the frequency cannot go below 25 kHz, no audible noise can be heard.
The NCP1338 also features an efficient protective circuitry which, in presence of an overcurrent condition, disables the output pulses and enters a safe burst mode, trying to restart.
Once the default has gone, the device auto−recovers.
Also included is a bulk voltage monitoring function (known as brown−out protection), an adjustable overpower compensation, and a VCC OVP.
The fault timer is reset by any of these 3 conditions to ensure that the controller immediately restarts when the condition disappears.
Finally, an internal 4.
0 ms soft−start eliminates the traditional startup stress.
NCP1338 can be used in applications where the VCC supply voltage is delivered by an external dc voltage source.
Features • Free−Running Borderline/Critical Mode Quasi−Resonant Operation • Current−Mode • Soft−Skip Mode with Minimum Switching Frequency for Standby • Auto−Recovery Short−Circuit Protection Independent of Auxiliary Voltage • Overvoltage Protection • Brown−Out Protection • Two Externally Triggerable Fault Comparators (one for a disable function, and the other for a permanent latch) • Internal 4.
0 ms Soft−Start • 500 mA Pea...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)