DatasheetsPDF.com

MX25L1605A

MXIC
Part Number MX25L1605A
Manufacturer MXIC
Description 16M-Bit CMOS Serial Falsh
Published Jan 23, 2011
Detailed Description ADVANCED INFORMATION MX25L1605A 16M-BIT [x 1] CMOS SERIAL FLASH FEATURES GENERAL • Serial Peripheral Interface (SPI) co...
Datasheet PDF File MX25L1605A PDF File

MX25L1605A
MX25L1605A


Overview
ADVANCED INFORMATION MX25L1605A 16M-BIT [x 1] CMOS SERIAL FLASH FEATURES GENERAL • Serial Peripheral Interface (SPI) compatible -- Mode 0 and Mode 3 • 16,777,216 x 1 bit structure • 512 Equal Sectors with 4K byte each - Any Sector can be erased individually • 32 Equal Blocks with 64K byte each - Any Block can be erased individually • Single Power Supply Operation - 2.
7 to 3.
6 volt for read, erase, and program operations • Latch-up protected to 100mA from -1V to Vcc +1V • Low Vcc write inhibit is from 1.
5V to 2.
5V PERFORMANCE • High Performance - Fast access time: 70MHz serial clock (15pF + 1TTL Load) and 66MHz serial clock (30pF + 1TTL Load) - Fast program time: 1.
4ms(typ.
) and 5ms(max.
)/page (256-byte per page) - Fast erase time: 90ms(typ.
) and 270ms(max.
)/sector (4K-byte per sector) ; 1s(typ.
) and 3s(max.
)/block (64Kbyte per block) • Low Power Consumption - Low active read current: 12mA(max.
) at 70MHz, 8mA(max.
) at 66MHz and 4mA(max.
) at 33MHz - Low active programming current: 30mA (max.
) - Low active erase current: 15mA (max.
) - Low standby current: 50uA (max.
) - Deep power-down mode 10uA (typical) • Minimum 100,000 erase/program cycles SOFTWARE FEATURES • Input Data Format - 1-byte Command code • Block Lock protection - The BP0~BP2 status bit defines the size of the area to be software protected against Program and Erase instructions.
• Auto Erase and Auto Program Algorithm - Automatically erases and verifies data at selected sector - Automatically programs and verifies data at selected page by an internal algorithm that automatically times the program pulse widths (Any page to be programed should have page in the erased state first) • Status Register Feature • Electronic Identification - JEDEC 2-byte Device ID - RES command, 1-byte Device ID HARDWARE FEATURES • SCLK Input - Serial clock input • SI Input - Serial Data Input • SO Output - Serial Data Output • WP# pin - Hardware write protection • HOLD# pin - pause the chip without diselecting the chip • PACKAGE...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)