DatasheetsPDF.com

ICS290

Integrated Device Technology
Part Number ICS290
Manufacturer Integrated Device Technology
Description Triple PLL Field Prog. Spread Spectrum Clock Synthesizer
Published Jul 16, 2010
Detailed Description PRELIMINARY INFORMATION www.DataSheet4U.com ICS290 Triple PLL Field Prog. Spread Spectrum Clock Synthesizer Descripti...
Datasheet PDF File ICS290 PDF File

ICS290
ICS290


Overview
PRELIMINARY INFORMATION www.
DataSheet4U.
com ICS290 Triple PLL Field Prog.
Spread Spectrum Clock Synthesizer Description The ICS290 field programmable spread spectrum clock synthesizer generates up to eight high-quality, high-frequency clock outputs including multiple reference clocks from a low-frequency crystal input.
It is designed to replace crystals, crystal oscillators and stand alone spread spectrum devices in most electronic systems.
Using ICS’ VersaClockTM software to configure PLLs and outputs, the ICS290 contains a One-Time Programmable (OTP) ROM for field programmability.
Programming features include input/output frequencies, spread spectrum amount, eight selectable configuration registers and up to two sets of four low-skew outputs.
Using Phase-Locked Loop (PLL) techniques, the device runs from a standard fundamental mode, inexpensive crystal, or clock.
It can replace multiple crystals and oscillators, saving board space and cost.
The ICS290 is also available in factory programmed custom versions for high-volume applications.
Features • • • • • • • • • • • • • Packaged as 20-pin TSSOP Eight addressable registers Replaces multiple crystals and oscillators Output frequencies up to 200 MHz at 3.
3 V Configurable Spread Spectrum Modulation Input crystal frequency of 5 to 27 MHz Clock input frequency of 3 to 166 MHz Up to eight reference outputs Up to two sets of four low-skew outputs Operating voltages of 3.
3 V Controllable output drive levels Advanced, low-power CMOS process Available in Pb (lead) free packaging Block Diagram VDD PLL1 with Spread Spectrum Divide Logic and Output Enable Control 3 S2:S0 3 CLK1 CLK2 CLK3 CLK4 CLK5 CLK6 CLK7 CLK8 OTP ROM with PLL Values PLL2 PLL3 X1/ICLK Crystal or Clock Input Crystal Oscillator X2 External capacitors are required with a crystal input.
GND 3 PDTS MDS 290 C Integrated Circuit Systems, Inc.
● 1 525 Race Street, San Jose, CA 95126 ● Revision 062305 tel (408) 297-1201 ● www.
icst.
com PRELIMINARY INFO...



Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)