DatasheetsPDF.com

LPC2129

NXP Semiconductors
Part Number LPC2129
Manufacturer NXP Semiconductors
Published Jul 5, 2010
Description Single-chip 16/32-bit microcontrollers
Detailed Description www.DataSheet4U.com LPC2109/2119/2129 Single-chip 16/32-bit micr
Datasheet PDF File LPC2129 PDF File

LPC2129
LPC2129


Overview
www.
DataSheet4U.
com LPC2109/2119/2129 Single-chip 16/32-bit microcontrollers; 64/128/256 kB ISP/IAP flash with 10-bit ADC and CAN Rev.
06 — 10 December 2007 Product data sheet 1.
General description The LPC2109/2119/2129 are based on a 16/32-bit ARM7TDMI-S CPU with real-time emulation and embedded trace support, together with 64/128/256 kB of embedded high-speed flash memory.
A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at maximum clock rate.
For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 % with minimal performance penalty.
With their compact 64-pin package, low power consumption, various 32-bit timers, 4-channel 10-bit ADC, two advanced CAN channels, PWM channels and 46 fast GPIO lines with up to nine external interrupt pins these microcontrollers are particularly suitable for automotive and industrial control applications, as well as medical systems and fault-tolerant maintenance buses.
With a wide range of additional serial communications interfaces, they are also suited for communication gateways and protocol converters as well as many other general-purpose applications.
Remark: Throughout the data sheet, the term LPC2109/2119/2129 will apply to devices with and without the /00 or /01 suffixes.
The /00 or the /01 suffix will be used to differentiate from other devices only when necessary.
2.
Features 2.
1 Key features brought by LPC2109/2119/2129/01 devices I Fast GPIO ports enable port pin toggling up to 3.
5 times faster than the original device.
They also allow for a port pin to be read at any time regardless of its function.
I Dedicated result registers for ADC(s) reduce interrupt overhead.
The ADC pads are 5 V tolerant when configured for digital I/O function(s).
I UART0/1 include fractional baud rate generator, auto-bauding capabilities and handshake flow-control fully implemented in hardware.
I Buffered SSP serial controller supporting SPI, 4-wire SSI, an...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)