AC Semiconductor Contactor - celduc-relais
Description
celpac®
AC Semiconductor Contactor pitch 22,5mm compact size and DIN rail mounting.
t Ready to use Single-Phase Relay: " Install it & Forget it!" t Zero cross model : 12-275VAC 25A alternistor on output.
I2t value > 312A2s .
t Large control range : 3-32VDC with an input current < 10 mA on all the range.
Green LED visualization on the input.
t Very high immunity www.
DataSheet4U.
com t IP20 housing t Low leakage current (<1mA) and low zero cross voltage ( <10V) t Mounting and dismounting on DIN rail without any tool or directly mountable on panel.
t Designed in conformity with EN60947-4-3 (IEC947-4-3)-UL-cUL Dimensions : : Voltage protection on output and input- 4kV according IEC61000-4-4 & 5
S/CLP/SIL842170/B/21/04/2004
page 1 / 4GB
SIL842170
Output : 12-275VAC 25A(*) Input : 3-32VDC/I<10mA
(*) see conditions (thermal curve page 3) 20A 230VAC 50hz
Protection
L1
SSR
Typical application: 4kW resistor (AC-51 load) on 230 VAC
T1 A2 A1
- +
Control
load LOAD
Proud to serve you
All technical caracteristics are subject to change without previous notice.
Caractéristiques sujettes à modifications sans préavis.
r
celduc
e l a i
s
celpac®
Control characteristics (at 25°C) Paramètre / Parameter Control voltage Control current (@ Uc ) Release voltage Input LED Reverse voltage Clamping voltage Input immunity : EN61000-4-4 Input immunity : EN61000-4-5 Output characteristics (at 20°C) Parameter Load voltage Operating range Peak voltage www.
DataSheet4U.
com Clamping voltage Zero cross level Latching voltage AC-51 nominal current : permanent AC-53 nominal current Non repetitive overload current On state voltage drop (typical value) Dynamic resistance (typical value) Output Power dissipation (typical value) Thermal resistance between junction to air : calm air Off state leakage current Minimum load current Turn on time Turn off time Operating frequency range Off state dv/dt Maximum di/dt non repetitive I2t (<10ms) Conducted immunity level Conducted immunity level Short cir...
Similar Datasheet
