SMT Power Inductors - Coilcraft lnc
Description
Document 333-1
SMT Power Inductors - LPO6610 Series
• Very low profile - only 1.
0 mm high! • Handles current up to 1.
7 Amps rms
Designer’s Kit C367 contains 3 each of all values Core material Ferrite Core and winding loss See www.
coilcraft.
com/coreloss Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 91.
0 – 95.
0 mg Ambient temperature –40°C to +85°C with Irms current, +85°C to +125°C with derated current Storage temperature Component: –40°C to +125°C.
Packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 1000/7″reel Plastic tape: 12 mm wide, 0.
3 mm thick, 8 mm pocket spacing, 1.
2 mm pocket depth PCB washing Only pure water or alcohol recommended
www.
DataSheet4U.
com
Part number1
L2 DCR ±20% max (µH) (Ohms)
SRF typ (MHz) 190 140 115 90 88 66 55 42 38 29 22 18 14 12 10 8
1.
When ordering, please specify termination and packaging codes:
Isat3 (A) 2.
1 1.
9 1.
6 1.
3 1.
1 0.
90 0.
80 0.
65 0.
50 0.
40 0.
35 0.
30 0.
25 0.
18 0.
16 0.
13
Irms4 (A) 1.
7 1.
5 1.
4 1.
2 1.
1 0.
85 0.
75 0.
60 0.
52 0.
42 0.
36 0.
30 0.
26 0.
21 0.
18 0.
13
LPO6610-334MLC Termination: L = RoHS compliant silver-palladium-platinum-glass frit.
Special order: T = RoHS tin-silver-copper (95.
5/4/0.
5) or S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel.
EIA-481 embossed plastic tape (1000 parts per full reel).
B = Less than full reel.
In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use code letter C instead.
2.
Inductance tested at 100 kHz, 0.
1 Vrms, 0 Adc using an Agilent/HP 4263B LCR meter or equivalent.
3.
DC current at which the inductance drops 10% (typ) from its value without cu...
Similar Datasheet
