DatasheetsPDF.com

MAX5165

Part Number	MAX5165
Manufacturer	Maxim Integrated Products
Description	32-Channel Sample/Hold Amplifier
Published	Jan 17, 2010
Detailed Description	19-1469; Rev 0; 7/99 32-Channel Sample/Hold Amplifier with a Single Multiplexed Input General Description The MAX5165 c...
Datasheet	MAX5165 PDF File

Overview

19-1469; Rev 0; 7/99 32-Channel Sample/Hold Amplifier with a Single Multiplexed Input General Description The MAX5165 contains four 1-to-8 multiplexers and 32 sample/hold amplifiers.
A single analog input connects to all four internal 1-to-8 multiplexers.
The sample/hold amplifiers are organized into four octal sample/holds with independent TTL/CMOS-compatible track/hold enables for each octal set.
Additional 3-bit TTL/CMOScompatible address logic selects the 1-to-8 multiplexer channel.
Clamping diodes on each output allow clamping between two external reference voltages.
The MAX5165 is available with an output impedance of 50Ω, 500Ω, or 1kΩ, allowing output filtering.
The MAX5165 operates ...

Similar Datasheet

MAX510 Quad / Serial 8-Bit DACs - Maxim
MAX5100 +2.7V to +5.5V / Low-Power / Quad / Parallel 8-Bit DAC with Rail-to-Rail Voltage Outputs - Maxim
MAX5101 +2.7V to +5.5V / Low-Power / Triple / Parallel 8-Bit DAC - Maxim
MAX5102 +2.7V to +5.5V / Low-Power / Dual / Parallel 8-Bit DAC with Rail-to-Rail Voltage Outputs - Maxim
MAX5104 Low-Power / Dual / Voltage-Output / 12-Bit DAC with Serial Interface - Maxim
MAX5105 Nonvolatile / Quad / 8-Bit DACs - Maxim
MAX5106 Nonvolatile / Quad / 8-Bit DACs - Maxim
MAX5109 8-Bit DACs - Maxim Integrated Products
MAX5115 Nonvolatile - Quad 8-Bit DACs with 2-Wire Serial Interface - Maxim
MAX5116 Nonvolatile - Quad 8-Bit DACs with 2-Wire Serial Interface - Maxim

Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)