DatasheetsPDF.com

UPD78013Y

NEC
Part Number UPD78013Y
Manufacturer NEC
Description 8-Bit Single-Chip Microcontrollers
Published May 16, 2007
Detailed Description User’s Manual µPD78014, 78014Y SUBSERIES 8-BIT SINGLE-CHIP MICROCONTROLLERS www.DataSheet4U.com µPD78011B µPD78012B µ...
Datasheet PDF File UPD78013Y PDF File

UPD78013Y
UPD78013Y

Overview
User’s Manual µPD78014, 78014Y SUBSERIES 8-BIT SINGLE-CHIP MICROCONTROLLERS www.
DataSheet4U.
com µPD78011B µPD78012B µPD78013 µPD78014 µPD78P014 µPD78011B (A) µPD78012B (A) µPD78013 (A) µPD78014 (A) µPD78011BY µPD78012BY µPD78013Y µPD78014Y µPD78P014Y Document No.
U10085EJ7V0UM00 (7th edition) Date Published October 1997 N © Printed in Japan 1992 1 [MEMO] www.
DataSheet4U.
com 2 NOTES FOR CMOS DEVICES 1 PRECAUTION AGAINST ESD FOR SEMICONDUCTORS Note: Strong electric field, when exposed to a MOS device, can cause destruction of the gate oxide and ultimately degrade the device operation.
Steps must be taken to stop generation of static electricity as much as possible, and quickly dissipate it once, when it has occurred.
Environmental control must be adequate.
When it is dry, humidifier should be used.
It is recommended to avoid using insulators that easily build static electricity.
Semiconductor devices must be stored and transported in an anti-static container, static shielding bag or conductive material.
All test and measurement tools including work bench and floor should be grounded.
The operator should be grounded using wrist strap.
Semiconductor devices must not be touched with bare hands.
Similar precautions need to be taken for PW boards with semiconductor devices on it.
2 HANDLING OF UNUSED INPUT PINS FOR CMOS Note: No connection for CMOS device inputs can be cause of malfunction.
If no connection is provided to the input pins, it is possible that an internal input level may be generated due to noise, etc.
, hence causing malfunction.
CMOS devices behave differently than Bipolar or NMOS devices.
Input levels of CMOS devices must be fixed high or low by using a pull-up or pull-down circuitry.
Each unused pin should be connected to V DD or GND with a resistor, if it is considered to have a possibility of being an output pin.
All handling related to the unused pins must be judged device by device and related specifications governing the www.
DataSheet4U.
co...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)