DatasheetsPDF.com

MD1811

Supertex
Part Number MD1811
Manufacturer Supertex
Description HIGH SPEED QUAD MOSFET DRIVER
Published Apr 5, 2007
Detailed Description www.DataSheet4U.com MD1811 Initial Release High Speed Quad MOSFET Driver Features 6ns rise and fall time 2 A peak outp...
Datasheet PDF File MD1811 PDF File

MD1811
MD1811


Overview
www.
DataSheet4U.
com MD1811 Initial Release High Speed Quad MOSFET Driver Features 6ns rise and fall time 2 A peak output source/sink current 1.
2V to 5V input CMOS compatible 5V to 12V total supply voltage Smart Logic threshold Low jitter design Quad matched channels Drives two N and two P Channel MOSFETs Outputs can swing below ground Low inductance quad flat no-lead package General Description The Supertex MD1811 is a high speed, quad MOSFET driver designed to drive high voltage P/N-channel MOSFETs for medical ultrasound applications and other applications requiring a high output current for a capacitive load.
The high-speed input stage of the MD1811 can operate from a 1.
2 to 5.
0 volt logic interface with an optimum operating input signal range of 1.
8 to 3.
3 volts.
An adaptive threshold circuit is used to set the level translator switch threshold to the average of the input logic 0 and logic 1 levels.
The input logic levels may be ground referenced, even though the driver is putting out bipolar signals.
The level translator uses a proprietary circuit, which provides DC coupling together with high-speed operation.
The output stage of the MD1811 has separate power connections enabling the output signal L and H levels to be chosen independently from the supply voltages used for the majority of the circuit.
As an example, the input logic levels may be 0 and 1.
8 volts, the control logic may be powered by +5 and –5 volts, and the output L and H levels may be varied anywhere over the range of –5 to +5 volts.
The output stage is capable of peak currents of up to ±2 amps, depending on the supply voltages used and load capacitance present.
The OE pin serves a dual purpose.
First, its logic H level is used to compute the threshold voltage level for the channel input level translators.
Secondly, when OE is low, the outputs are disabled, with the A & C output high and the B & D output low.
This assists in properly pre-charging the AC coupling capacitors that may be used in se...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)